Thinking about making the switch to IP cameras? Here’s what to consider.
If you’re thinking about upgrading your analog cameras to IP, there are a variety of factors to think about. While the price gap between the two is getting smaller, there are advantages and disadvantages to both and what you choose ultimately depends on your organization’s specific needs.
Benefits of Analog Cameras
- Cost: The most obvious reason to stick with your analog system is the price tag. Analog cameras tend to be significantly cheaper, especially as your camera count increases.
- Larger pool of installers and vendors: Since analog cameras have been around for years and because they are fairly simple to install, you may have an easier time finding an installer, as well as a vendor.
- Simplicity: Analog cameras are fairly easy to run, sending recordings to a digital video recorder (DVR), which then converts the analog to digital and stores it. DVRs are also simple to set up and run.
- The technology is getting better: “High definition (HD) analog has tremendously increased the picture quality and the resolution. You can get four and five megapixel cameras that are HD analog, and that’s impressive. However, when you compare apples for apples on your resolution, there are many more benefits to an IP camera.
Disadvantages of Analog Cameras
- Frame rate and image quality: The frame rate of analog cameras is lower than that of IP, so they’re not ideal for areas that have a lot of motion or that need to be seen in high detail. Images are not as sharp and may appear grainy or blurry. You also can’t digitally zoom in like you can with IP cameras. However, for certain situations or areas, image quality may not be a crucial factor. “Depending on the application, there are plenty of circumstances where a high frame rate isn’t necessary,” says Sutton.
- Less coverage: It may take more analog cameras to cover the same amount of area as it would take one IP camera.
- More cables: You need a power cable, plus a DVR cable, whereas you only need one cable with IP cameras.
- No encryption: A lack of encryption means a hacker could potentially access your information or replace your signal with an outside one.
Benefits of IP Cameras
- Multiple sensors: IP cameras have the ability to contain three or four cameras in one, which can cover an area that may normally take multiple cameras to cover. They actually go in as one signal through one cable to your system, and it only costs one license too.
- Costs have gone down: Like any piece of technology, IP cameras have less sticker shock than they used to, You can still spend some money if you’re really trying to, but you can get some really good entry-level IP-based cameras for a reasonable amount of money, Additionally, you may need fewer IP cameras to do the same job as analog cameras, so your IP investment could be a wash.
- Ease of installation: Whereas an analog camera takes two wires, an IP camera only takes one for both data and power that connects to a network switch, so you don’t need power at the camera site. You can also focus and zoom in remotely, Once it’s installed, as long as you’ve got it angled at what you want to angle it at, you can control the focus remotely from your workstation.
- Resolution: Resolution in cameras just keeps getting better and better, and IP cameras have superior image quality to that of analogs. You can get cameras with different resolutions and aspect ratios customized to your needs.
- Intelligence and analytics: IP cameras are basically small computers that compress and store video, plus they can be programmed to provide all sorts of analytics. They can detect motion or smoke, count people, track certain colors, sense when something disappears, and set off alarms. You can draw a trip line where if something crosses that line. That’s not analog cameras. All that fancy stuff comes from IP cameras.”
- Security: Video is encrypted and authenticated so transmission is secure.
- Less equipment: Whereas with an analog camera you need to have an encoder or decoder, there’s no need for that with IP.
- Open platform: You can use an IP camera with anything, for the most part. They’re universal. This makes it easier to add new functions to your system.
Disadvantages of IP Cameras
- Cost of initial set-up: It may cost more to initially set up your IP camera system if you’re making the switch from analog; however, once you have it set up, it’s much easier to tailor and scale your system as needed.
- Storage: IP cameras are higher resolution, so they generate larger files than analog. You’ll need to adjust your storage space accordingly.
Learning curve: With IP cameras, there’s a user interface. A lot of it is pretty intuitive once you get going, but there is a certain level of technicality that needs to be learned by the end user.
Making the Switch to IP Cameras?
Here’s some advice to consider before you move to an IP system:
- Bring in an independent consultant. The expectations you have for your cameras may not fit their capabilities, so having an impartial party at the table to help you see the realities of what you need and want is crucial. The biggest thing that I’ve seen in camera projects that have failed is expectations, what you want the system to be able to do when you’re done.
- Replace as you can. If your budget is unlimited, switch out all your analog cameras with IP, advises Sutton. In the more likely event that you’re on a limited budget, consider replacing a few cameras at a time instead. Run what’s called a hybrid system, it would keep analogs if you couldn’t afford to do them all, replace the ones that are the most important, and then build a plan to switch them all over to IP as the analogs die.
- Find an installer and/or vendor who specializes in IP systems.. You really want to deal with someone who understands the technology, understands the networking, who understands what it’s capable of doing and how it needs to be set up to make sure that’s what you’re going to get, You need a certain level of vendor.
- Discuss what you really need. IP cameras come with all sorts of capabilities, but just because you’re excited about the potential bells and whistles doesn’t mean you need them. What do you really need? What do you want to accomplish? What’s a realistic budget? Then, how do we get you there?” The goal is to get the property to where you want to be that’s within your budget with an analytic system that’s usable and has longevity to it.”
Revisit your security plan. Switching from analog to IP creates a perfect opportunity to revisit your plans with what you’re trying to accomplish, reevaluate your risk and your vulnerabilities, and see where you’re going to need to replace cameras. - Build your system for future growth potential. That he’s never been to a property where after installing a new video system people wanted fewer cameras. When people see how good the technology is and how versatile it is and what they can get from it, they want more cameras. When he works with organizations to install new systems, he typically makes sure there’s room for growth in the design.
- Think about lighting. Light is one of the most important things to consider in designing a camera system, and people overlook it all the time, There’s really no one camera that can do everything. You need to have the right camera for the right application.
- Have a clear, written policy. Issues such as camera maintenance, budget, length of time to store images, conditions under which to release images, if and when to let others view video, goals of the system, and method of storage need to be clearly defined and written down. You’re going to do some maintenance. You’re going to have some licensing costs in all cases. The reality is, as soon as you put a piece of equipment in place, you need to be thinking about replacement.